How to Put a Bicycle Chain Back On – The Best Guide

“There is no wrong way to ride a bicycle.”

-John Howard

If you are like most people, at some point you have probably experienced the frustration of a slipping chain while riding your bike. Maybe your chain came off while shifting gears, or maybe it just seems to be falling off more frequently than it used to.

Whatever the case may be, putting your chain back on is a relatively easy process that you can do yourself with just a few tools.

Don’t worry!

In this article, I will show you How to Put a Bicycle Chain Back On? in just a few simple steps.

So without further ado, let’s get started.

Step-By-Step Guide On How To Put A Bicycle Chain Back On

The following are the steps you need to take in order to put your chain back on:

Step 1: Find The Master Link

The first step is to find the master link. The master link is the link that allows you to take the chain off without having to use a chain tool.

If your chain does not have a master link, then you will need to use a chain tool to remove a link from the chain in order to take it off.

Step 2: Take The Chain Off

Once you have located the master link, simply push on one side of the link until it pops out. This will allow you to take the chain off of the bike.

If you do not have a master link, then use the chain tool to remove a link from the chain. Make sure that you remove a link from the middle of the chain and not from one of the ends.

Step 3: Clean And Lubricate The Chain

Now that the chain is off, it is a good time to clean and lubricate it. This will help to prevent the chain from rusting and will also make it easier to put back on.

To clean the chain, you can use a rag or a brush to remove any dirt or grime that has built up on it. Once the chain is clean, apply a light layer of lubricant to it.

Step 4: Put The Chain Back On

Now it is time to put the chain back on the bike. If you have a master link, simply line up the ends of the chain and push the master link back into place.

If you do not have a master link, then use the chain tool to connect the two ends of the chain together. Once the chain is connected, put it back on the bike.

Step 5: Adjust The Chain

Now that the chain is back on, you will need to adjust it. The chain should be tight enough that there is no slack, but not so tight that it is difficult to turn the pedals.

If the chain is too loose, it will fall off again. If the chain is too tight, it could damage the bike. To adjust the chain, use the barrel adjusters on the bike.

How Do You Know If Your Chain Is Broken

If your chain is broken, it will need to be replaced. To check if your chain is broken, simply look at it to see if any of the links are bent or damaged.

If you see any damage, then the chain will need to be replaced. You can purchase a new chain from most bike shops or online.

How Do You Keep Your Chain From Breaking In The First Place

The best way to keep your chain from breaking is to take care of it. This means keeping it clean and lubricated, and adjusting it as needed.

Also, be sure to inspect your chain regularly for any signs of damage. If you see any damage, replace the chain before it breaks.

Are There Any Other Ways To Fix A Bicycle Chain

If your chain is severely damaged, it may not be possible to repair it. In this case, you will need to replace the chain.

You can purchase a new chain from most bike shops or online. Be sure to choose a chain that is compatible with your bike.

What Should You Do If Your Chain Breaks While You’re Cycling

If your chain breaks while you’re cycling, the best thing to do is to stop and inspect the chain. If you see any damage, then the chain will need to be replaced. You can purchase a new chain from most bike shops or online. Be sure to choose a chain that is compatible with your bike.

Additional Tips

• Always clean and lubricate your chain regularly to prevent it from rusting or becoming damaged.

• Inspect your chain regularly for any signs of damage. If you see any damage, replace the chain before it breaks.

• If your chain breaks while you’re cycling, the best thing to do is to stop and inspect the chain. If you see any damage, then the chain will need to be replaced.

• Be sure to choose a chain that is compatible with your bike when purchasing a new one.

• When putting the chain back on, be sure to adjust it so that there is no slack but it is not too tight.

Conclusion

Putting a bicycle chain back on is not difficult, but it is important to do it correctly. First, you will need to take the chain off of the bike. Next, clean and lubricate the chain. Finally, put the chain back on the bike and adjust it. Taking care of your chain will help to prevent it from breaking. If your chain does break, be sure to inspect it for damage and then purchase a new one if necessary. Be sure to choose a chain that is compatible with your bike.

FAQs