How To Remove Bicycle Crank Without Crank Puller

“If you want to know How To Remove Bicycle Crank Without Crank Puller the most important thing is to have the right tools”

-Franklin D. Roosevelt

Whether you are a beginner or an experienced cyclist, at some point you will need to remove your bicycle crank. While most cranks can be removed with a crank puller, there are some instances where you may not have one or be able to use one. In these cases, it is still possible to remove your crank without a crank puller.

Guess what? I am going to share everything you need to know about Removing your Bicycle Crank Without Crank Puller.

So lets get started!

Table of Contents

How to remove bicycle crank without crank puller – Step By Step

Here are some steps to help you remove your bicycle crank without a crank puller:

Step1. Loosen the bolts on the crank arms

Before starting, make sure to loosen the bolts on the crank arms. This will make it easier to remove the crank later on.

Step2. Pry off one of the crank arms using a screwdriver or wrench

Once the bolts are loose, pry off one of the crank arms using a screwdriver or wrench. Be careful not to damage the crank arm in the process.

Step3. Remove the bearings from the removed crank arm

Once you’ve removed the crank arm, remove the bearings from it. You can do this by hitting them with a hammer or using a bearing extractor.

Step4. Repeat these steps on the other side of the crankset

Once you’ve removed the bearings from the first side, repeat these steps on the other side of the crankset.

Step5. Clean and lubricate your bike chain

Now that the crank arms are removed, it’s time to clean and lubricate your bike chain. This will help keep it running smoothly.

Step6. Reassemble the bike crank:

Once you’ve cleaned and lubricated your bike chain, reassemble the bike crank. Make sure to tighten the bolts on the crank arms before you finish.

Step7. Tighten the bolts on the crank arms

Once you’ve reassembled the bike crank, tighten the bolts on the crank arms. This will keep it in place.

Step8. Test your bike to make sure it’s working properly

Now that your bike crank is removed, test your bike to make sure it’s working properly. If everything looks good, you’re done!

If you need to remove your bicycle crank for any other reason, these steps will help you do it without a crank puller. Be careful not to damage the crank arm in the process.

Safety Tips

Here are some safety tips to keep in mind when removing your bicycle crank without a crank puller:

1. Make sure your bike is parked on a level surface, and that the front wheel is securely locked in place.
2. Remove any other accessories from the bike, such as the seat or baskets.
3. Disengage the chain from the gears by moving it to the largest cog and pedaling backward a few times.
4. Place a block of wood or another sturdy object behind the bicycle’s pedal on the side you will be working on. This will prevent the crank from spinning as you remove it.
5. Loosen the bolts that hold the crank in place using a wrench or socket set. Do not remove them completely – you will need them to put the crank back on later.
6. Gently tap the end of the crank with a hammer until it pops free from the axle. Be careful not to hit your hand or any other part of your body while doing this.
7. If the crank is stubborn and doesn’t want to pop out, you can use a rubber mallet to help loosen it. Just be careful not to damage the crank or axle.
8. Once the crank is free, set it aside and repeat these steps for the other side.

FAQs

What are the consequences of not being able to remove the crank?

If you are unable to remove the crank, you will not be able to fix the bike yourself and will need to take it to a mechanic. Removing the crank is a necessary step in many repairs, so without it you will be unable to complete most bike fixes.

Can I use a screwdriver or pliers to remove the crank?

No, you should not use a screwdriver or pliers to remove the crank. These tools can damage the crank or axle and will make the job much more difficult.

How do you know if you’re using the correct tool to remove the crank?

The tool you use to remove the crank will depend on the type of axle your bike has. Most axles have a square or hexagonal end, so you will need a wrench or socket set that fits that shape. If you are not sure which tool to use, consult a bicycle repair manual or take your bike to a mechanic.

What is a bicycle crank?

The crank is the part of the bike that connects the pedals to the axle. It is responsible for transferring energy from the pedals to the wheel and is made up of two parts – the crank arm and the axle. The crank arm is the part that you pedal with, while the axle is a metal rod that runs through the center of the crank arm and connects it to the wheel.

When do I need to remove the crank?

You will need to remove the crank in order to fix most problems with the bike, such as replacing the chain, adjusting the gears, or fixing a broken axle. It is also necessary to remove the crank when installing a new bottom bracket.

Conclusion

We showed you how to remove a bicycle crank without a crank puller. We hope you found this information helpful. If you have any questions or feedback, please leave us a comment below. Thanks for reading!